How to easily maintain the filling machine in the hot summer!
Summer is the season of high temperature and rain, high temperature is a challenge for all kinds of machinery, and the same is true for liquid filling machines. Many parts of the filling machine are made of stainless steel, but there are still many structures made of steel, so in this high temperature and rainy season, the filling machine is prone to failure. Then use special oil to scrub the parts of the machine that do not touch the material. The cylinder of the filling machine has been lubricated before leaving the factory, so try not to disassemble the cylinder or add any lubricating oil yourself to be careful to cause damage to the cylinder. Pay attention to the sealing ring of the filling machine, and replace it in time once it is worn. The material tank, stainless steel three-way and three-way steering valve of the filling machine are generally detachable, and they can be removed and cleaned when cleaning. After disassembling and washing, install it according to the original position, and then test it to see if there is any abnormal reaction. If everything is normal, you can start production.
Before disassembling and washing the liquid filling machine, please be sure to turn off the air source and power supply, and then carry out the disassembly and washing operation. The stainless steel of the wine filling machine is just ordinary steel with a layer of alloy on the surface. Under ordinary circumstances, there will be no problems on the surface of the stainless steel, but when encountering sharp objects, the stainless steel is scratched, and it is easy to scratch the surface. Rust stains appear at the place, which brings quality pollution to the products produced. If there are stains on the surface, it can be wiped with special oil.
Post time: Sep-08-2022