• facebook
  • linkedin
  • twitter
  • youtube

Double homogenizer vacuum emulsifying mixer machine|Cosmetics Emulsifier

Brief Description:

1.Double  high homogeneous torque shearing motor design 

2. Siemens touch PLC operating system

3.Tanks material . inner layer SS 316. Middle and out layer SS304

3.Motor brand: AAB or  Siemens The capacity from 100 litre up to 5000 litre

4.Heating method : steam heating or electrical heating

5.Power supply : three phase 220 voltage 380 voltage 460voltage 50HZ 60HZ for option

6.Lead time 30 days

7.System composition:  Water phase pot, oil phase pot, emulsifying pot, vacuum pump, hydraulic system, electrical control system, working platform, stairs and other parts 


Product Detail

VIDEO

Product Tags

Product Description

1.Bottom material outlet,the products can be come out from the bottom. or you can also connect a pump to pump the product out quickly.

2. Made of imported SUS304 or SUS316L stainless steel. The mixing tank body and pipe are subjected to mirror polishing.

3. Material contact part SS316. Jacket heating, insulating layer and internal and external polishing.

4. The pot body is welded by imported three-layer stainless steel plate, Korean POSCO. The tank body and pipes adopt mirror polishing, which fully meet the international standards.

Double Homogenizer Vacuum Emulsifying Mixer Machine

5. Cosmetics Emulsifier  homogenizing structure is made through German techology. The machine adopts the improted double-end mechanical seal effect.The maximum emulsifying rotation speed can reach 3500rpm and the high shearing fineness can reach 0.2-5um.

6.Cosmetics Emulsifier outlet,the products can be come out from the bottom. or you can also connect a pump to pump the product out quickly

7.Made of imported SUS304 or SUS316L stainless steel. The mixing tank body and pipe are subjected to mirror polishing.

8.Material contact part SS316. Jacket heating, insulating layer and internal and external polishing.

9.The pot body is welded by imported three-layer stainless steel plate, Korean POSCO. The tank body and pipes adopt mirror polishing, which fully meet the international standards.

10.Under vacuum operation this mixer could prevent outside air and bobbles from entering into mixing chamber and occurring altogether.

11.The triple mixing adopts the imported frequency inverter for speed adjustment,which can meet different technological demands.

12.All contact parts are made of SS316L and mirror polished.

13.The product sliming, emulsification, mixing, dispersing, etc. which will finished during short time.

14.Cosmetics Emulsifier adopts feedback speed measurement to provide accurate data for materials of different viscosity;

15.External emulsifying and homogenizing by vertical type inline homogenizer with pipes;

16.The vacuum defoaming can make the materials meet the requirement of being sanitary and aseptic. The vacuum sucking material adopted can avoid dust, especially for the powder products.

17.vacuum emulsifying equipment equipped with heating & cooling system which simplifies the processing.

18.Cosmetics Emulsifier Within this same equipment, you can do from heating-melting-emulsifying-air bubble reduction(by vacuum)-cooling without changing vessels, it saves lot of labor and time for your production.

19.Cosmetics Emulsifier installed on boiler bottom to increase motor power more thoroughly and strongly. During few production, it can exert homogenizing effect fully;

20.The material in the pot is emulsified by the high-speed internal circulation shearing, mixing and emulsification of the homogenizer, opposite double stirring, clockwise frame type wall scraping stirring, counterclockwise paddle type stirring.

21.The whole tanks of Cosmetics Emulsifier  is a three-jacket. The heating and cooling of the equipment are completed in the same jacket.

22.The outer layer of the jacket has an aluminum silicate insulation layer, which can prevent the operator from scalding and ensure production safety.

23. pot of Cosmetics Emulsifier is equipped with a bottom valve, and the discharging can use the lid to rise, manual dumping, the inclination angle is greater than 90 degrees.

Technical parameter:

 

Model

Capacity(L)

Emulsify motor

Mixing motor

Toal power

(steam/electric heating )

Limited vacuum (Mpa)

Size (mm)

L*W*H

Main pot

Oil pot

Water pot

KW

RPM

KW

RPM

100

100

50

80

4

0--3000

1.5

0-63

10/37

-0.095

2385*2600*200-3000

200

200

100

160

5.5

2.2

12/40

2650*3000*2400-3200

500

500

250

400

11

4

18/63

 

1000

1000

500

800

15

5.5

30/90

 

2000

2000

1000

1600

18

7.5

40/120

 

Application

Homogenization: medicine emulsion, ointment, cream, facial mask, cream, tissue homogenization, milk product homogenization, juice, printing ink, jam:

(1) Daily chemical and cosmetic industry: skin care cream, shaving cream, shampoo, toothpaste, cold cream, sunscreen, facial cleanser, nutritional honey, detergent, shampoo, etc.

(2) pharmaceutical industry: latex, emulsion, ointment (ointment), oral syrup, etc.

(3) food industry: thick sauce, cheese, oral liquid, baby food, chocolate, boil sugar, etc.

(4) chemical industry: latex, sauce, saponification products, paint, coatings, resins, adhesives, detergents, etc.

Option

1.power supply: three phase : 220v 380v .415v. 50HZ 60HZ;

2.Capacity : 500L up to 5000L;

3.Motor brand : ABB. Siemens option;

4.Heating method: Electric heating and steam heating option;

5.control system plc touch screen. Key bottom;

6.Fixed type or Hydraulic lifting type or Pneumatic lifting;

7.variety of paddle designs meet difference requirement;

8.SIP is available upon request for cleaning process.

Video


  • Previous:
  • Next: