Well-designed Edi Unit For Water Treatment - Reverse Osmosis Industrial System with Edi Unit – ZhiTong Detail:
Video
Product Description
1. RO membrane components are imported products, with high flux, high rejection rate, strong chemical stability and other characteristics;
2. Key electrical components and pneumatic valves are imported to ensure reliable operation.
3. Compared with traditional ion exchange resin system
4. No acid, alkali regeneration, saving a lot of acid, alkali and cleaning water, greatly reducing labor intensity;
5. No waste acid waste lye discharge, is clean production technology, green environmental protection products;
6. The floor area is very small (less than 1/4 of the traditional process);
7.Process easy to realize automatic control;
8.The water quality is good, the water resistivity >17M ω ·cm
9.Reverse osmosis is to desalinate and purify saline by physical method without phase change at room temperature.
10..High degree of automation of reverse osmosis device, little workload of operation and maintenance of equipment.
11. Reverse osmosis pure water treatment equipment adopts automatic control mode to realize automatic operation and reduce the impact of human misoperation on equipment belt.
12. In the pretreatment system, the design of the reduction system is adopted to solve the irreparable impact of excessive residual chlorine on the ro membrane.
13. In the selection of reverse osmosis membrane, the Dow reverse osmosis membrane imported from the United States is selected. The service life can reach 3 years, and the conductivity of effluent water is less than 5us.
14. Lowest water and electricity consumption; Produce pure water to meet the requirements;
15. three automatic working types: programmable control, flow control, peng air system, and set alarm price button
17. high efficiency single stage Z double stage reverse osmosis design
18. .built-in easy to use and easy to install safe and efficient cleaning
19. Low operating costs and maintenance costs.
20. Manual and automatic mode conversion is convenient, with special reminder function to prevent non-operators from misoperation.
21. Water quality correction function, water quality warning function, there will not be a suddenly emergency state.
Technical parameter:
Model | Capacity(T/H) | Power(KW) | Recovery% | One stage water conductivity | Second water conductivity | EdI water conductivity | Raw water conductivity |
RO-500 | 0.5 | 0.75 | 55-75 | ≤10 | ≤2-3 | ≤0.5 | ≤300 |
RO-1000 | 1.0 | 2.2 | 55-75 | ||||
RO-2000 | 2.0 | 4.0 | 55-75 | ||||
RO-3000 | 3.0 | 5.5 | 55-75 | ||||
RO-5000 | 5.0 | 7.5 | 55-75 | ||||
RO-6000 | 6.0 | 7.5 | 55-75 | ||||
RO-10000 | 10.0 | 11 | 55-75 | ||||
RO-20000 | 20.0 | 15 | 55-75 |
Application
1) Pressure is the main driving force of the reverse osmosis separation process. It does not go through the phase change of energy-intensive exchange and has low energy consumption;
(2) Reverse osmosis does not need a lot of precipitant and adsorbent, low operating cost;
(3) The reverse osmosis separation engineering is simple in design and operation and short in construction period;
(4) Reverse osmosis purification efficiency is high, environmental friendly. Therefore, reverse osmosis technology has been widely used in domestic and industrial water treatment, such as seawater and brackish water desalination, medical and industrial water production, pure water and ultrapure water preparation, industrial wastewater treatment, food processing concentration, gas separation, etc..
Product detail pictures:
Related Product Guide:
Our personnel are always inside the spirit of "continuous improvement and excellence", and together with the outstanding excellent goods, favorable price and good after-sales services, we try to gain every customer's trust for Well-designed Edi Unit For Water Treatment - Reverse Osmosis Industrial System with Edi Unit – ZhiTong, The product will supply to all over the world, such as: Mauritius, Puerto Rico, Norwegian, We have developed large markets in many countries, such as Europe and the United States, Eastern Europe and Eastern Asia. Meanwhile with the powerful predominance in persons with ability, strict production management and business concept.we constantly carry on self-innovation, technological innovation, managing innovation and business concept innovation. To follow the world markets fashion, new products are kept on researching and providing to guarantee our competitive advantage in styles, quality, price and service.
By Eric from Chicago - 2018.07.27 12:26
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Lydia from Bangalore - 2017.06.29 18:55